MUC-OFF PRESSURE WASHING KIT

Meet the world's first pressure washer designed and manufactured exclusively for cleaning bicycles and motorcycles.

The Muc-Off Pressure Washer Motorcycle Package includes everything you need to restore your motorcycle to its factory-fresh appearance, while also taking care of delicate bearings, surfaces, and suspension components. Our pressure washer features three hoses to meet specific cleaning needs, as well as a Snow Foam Lance to transform your Nano Tech Motorcycle Cleaner bottle into the ultimate dirt-busting snow foam.

A waterproof Dry Bag is also included, along with a 1L bottle of Nano Tech Motorcycle Cleaner and a 1L concentrate refill. We've also thrown in a Motorcycle Protector and a luxurious microfiber cloth for good measure. All you need is a power source and a water source, and you'll be able to give your pride and joy the deep clean it deserves!

PRODUCT FEATURES

PRESSURE WASHER

Motor Power: 1200W
Volt/Frequency: 220-240V~50/60Hz
Motor Type: Carbon brush motor
Rated Pressure: 70 bar
Permissible Pressure: 100 bar
Max. Inlet Water Pressure: 1.2 MPa
Rated Flow: 5.5 L/min
Max. Flow: 6.5 L/min
Max. Water Temperature: 50°C
Water Protection Class: IPX5
N.W. / G/W: 5.5/6.2 kg
Carton Size: 290 x 265 x 413 mm
Power Cord Length: 5M

DRY BAG

30L capacity
Waterproof PVC construction
Heavy-duty handles
Front storage pocket
Rear and side accessory nets

SNOW FOAM LANCER

The special spray tip fits directly onto your bottle of Muc-Off Nano Tech Bike Cleaner, Muc-Off Nano Gel Concentrate, or 1L Snow Foam, meaning there's no need for an additional bottle for mixing or diluting.
The Top Dial adjusts the foam concentration but adjusts the water flow rate and mixes it with the cleaner in your bottle.
Produces high-quality, thick snow foam.
Soft-touch finish.

PROPER USE

THIS UNIT IS DESIGNED FOR USE WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE WASHER.

Do not operate the pressure washer at more than the pressure washer's rated fluid pressure.
Never operate the pressure washer without a water supply. Operating the unit without a water supply will cause irreparable damage to the unit.
Make sure the water you use for the pressure washer is not dirty, sandy, or contains caustic chemicals. Using a dirty water supply will compromise the longevity of the pressure washer.
NEVER move the unit by pulling the hose. Use the handle located on the top of the unit.

IMPORTANT SAFETY TIPS:

Never point the pressure nozzle at people or animals.
Never consume alcohol or drugs while operating the pressure washer.
Never operate the pressure washer while standing in water.
Never touch the power plug with wet hands.
Never allow electrical connections to become submerged in water.
Never operate the pressure washer without the water turned on.
Never use hot water with this pressure washer.

IMPORTANT SAFETY PRECAUTIONS

WARNING: When using this product, basic precautions should always be followed, including the following:

Read all instructions before using the product. Please keep all safety instructions.
Do not operate the pressure washer when you are tired or under the influence of alcohol or drugs.
Risk of injection or injury; do not direct the water stream at people or animals.
Never allow children to operate the pressure washer.
To reduce the risk of injury, please take extra care when using the pressure washer near children.
Know how to stop the unit and how to immediately reduce the pressure. Be fully familiar with the controls.
Be alert; always be aware of where you are directing the spray.
Keep the cleaning area clear of people.
Always maintain proper footing and balance; do not overreach or stand on an unstable surface.
The work area must have adequate drainage to reduce the risk of falls from slippery surfaces.
Follow the maintenance instructions in this manual. To reduce the risk of electric shock, keep all connections dry and off the ground. Do not touch plugs with wet hands.

HOW TO USE:

Connect the Muc-Off Pressure Washer to a mains power supply and a water outlet using a suitable connection.

Using the dedicated bike nozzle, thoroughly rinse your bike using only water to remove the worst dirt.

Take the snow foam nozzle, connect it to the Nano Tech Motorcycle Cleaner, adjust the foam nozzle accordingly, and apply a generous amount of snow foam to your entire bike.

Wait 3-5 minutes for the formula to work its magic. Remove any stubborn dirt with a brush or sponge.

Reconnect the dedicated bike hose and rinse your entire bike thoroughly.

Dry your bike with a clean microfiber cloth.